Thermal Material

2000 series thermal grease

Product features

application:

2000 series thermal grease widely used in a variety of electronic products, microwave communications, microwave transmission equipment, microwave power supply, regulated power supply and other microwave devices surface coating, heat-producing electronic components, providing excellent thermal conductivity. Such as: transistors, CPU assembly, thermistors, temperature sensors, automotive electronic components, automotive refrigerators, power modules, printer heads and so on.

Features and advantages:

2000 series thermal silicone grease commonly known as thermal paste, thermal grease to silicone as the main raw material, add heat-resistant, excellent thermal conductivity of materials, made of thermal-conducting silicone lipid compound.

▪ has low oil separation, high and low temperature, water, ozone, climate aging;

▪ can be used for a long time at temperatures of -40℃ - 150℃;

▪ thermal grease has excellent thermal conductivity, electrical insulation, stability of use, low consistency and good construction performance.

EIGENVALUE

characteristic	2100	2200	2300	2400	2500	2600	2000D	2000W	standard test
Material	Ceramic powder filled silica gel	Ceramic powder filled silica gel	Ceramic powder filled silica gel	Ceramic powder filled silica gel	Ceramic powder filled silica gel	Ceramic powder filled silica gel	Low-molecular-weight silicone resin	Resin	/
colour	white	white	white	White or gray	White or gray	White or gray	White or gray	White or gray	Visually
Thermal Conductivity	1.0 W/M.K	1.3 W/M.K	1.7 W/M.K	2.0 W/M.K	2.5 W/M.K	3.0 W/M.K	0.7-3.0 W/M.K	/	ASTM-D5470
proportion	1.53 g /cm³	1.66 g /cm³	1.84 g /cm³	1.99 g /cm³	2.78 g /cm³	2.98 g /cm³	1.3-3.0 g /cm³	1.3-3.0 g /cm³	ASTM-D792
Volume resistance	≥10 ¹⁵ Ω · CM	≥10 ¹⁵ Ω · CM	≥10 ¹⁵ Ω · CM	≥10 ¹⁵ Ω · CM	≥10 ¹⁵ Ω · CM	≥10 ¹⁵ Ω · CM	≥10 ¹⁵ Ω · CM	≥10 ¹⁵ Ω · CM	ASTM-D257
RoHs	meets the	meets the	meets the	meets the	meets the	meets the	meets the	meets the	/
Operating temperature	-40 ~ +150 ℃	-40 ~ +150 ℃	-40 ~ +150 ℃	-40 ~ +150 ℃	-40 ~ +150 ℃	-40 ~ +150 ℃	-40 ~ +150 ℃	-40 ~ +150 ℃	EM344
Note: The data recorded on this website are representative values rather than guaranteed values. To improve product performance, specifications are subject to change without notice. The use of the product recorded in this website is just an example. The product can have a variety of different application scenarios and environments, which are beyond our control. Therefore, whether the product is suitable for your production process and conditions, you need to make full use of it before using it. Evaluate to confirm whether its performance and effect are in line with expectations. For applications that need to be considered safe, please test and confirm their safety in advance. In addition, the company does not guarantee that the purposes recorded on this website will not infringe any patents. Before using this product, please carefully read the explanatory text and safety data sheet (MSDS) marked on the main body of the product. This product is manufactured for general industrial applications. Do not use for medical purposes. The product may precipitate during storage. This is a normal phenomenon. Please mix well before use and strictly follow the product storage and transportation instructions. In order to obtain the best performance, the bonding surface should be clean, dry and free of grease. For high-strength structural bonds, special surface treatment can increase bond strength and durability. The material taken out of the container may be contaminated during use. Do not put the material back into the original container. Kingbali® cannot be held responsible for products that are contaminated or stored under non-instructed conditions.