Adhesive Management

1923 Series one group of spectrocuring adhesives

Product features

application:

1923 Series one group of spectrocuring adhesives is suitable for glass and glass, glass and metal, glass and plastic (PP, PC, PVC, etc.) bonding;Mainly used in electrical appliances, automobiles, construction, consumer goods, electronicproducts, transportation, metal processing, sporting goods, composite materials,electronics, metal welding, general industry.

Features and advantages:

▪ Solvent-free, non-volatile single-component photocurable adhesive;

▪ 360-400nm wavelength ultraviolet light irradiation curing, curing period is short, shrinkage is low, the glass substrate adhesion is strong, to meet the requirements of precision process, good water resistance;

▪ High material stability, good toughness, shock resistance, to meet the requirements of long-term use;

EIGENVALUE

characteristic1000-1923standard test
colourAdjustableVisually
Viscosity (25°C)

1.5-2 Pa.S

ASTM D2196
density1.24 g/cm3ASTM D792
Volume resistance10 12  Ω · CMASTM-D257
Breakdown voltage (1mm)≥5 KVASTM D149
Shear strength>8 MPaASTM D412-1998A
Peel strength>0.4 kgf/mmASTM D1876
Heat distortion temperature≥120℃EN344
hardness≥60 Shore DASTM D2240
Curing condition360-400nm wavelength ultraviolet light irradiation/
Surface drying time (25°C)3~5 S/
Curing time (25°C)10~30 S/
Note: The data recorded in this TDS are representative values ​​rather than guaranteed values. To improve product performance, specifications are subject to change without notice. The use of the product recorded in this TDS is only an example. The product can have various application scenarios and environments, which are beyond our control. Therefore, you need to make your own sufficient before using the product to determine whether the product is suitable for your production process and conditions. Evaluate to confirm whether its performance and effect are in line with expectations. For applications that need to be considered safe, please test and confirm their safety in advance. In addition, the company does not guarantee that the use described in this TDS will not cause any patent infringement. Before using this product, please carefully read the explanatory text and safety data sheet (MSDS) marked on the main body of the product. This product is manufactured for general industrial applications. Do not use for medical purposes.
The product may precipitate during storage. This is a normal phenomenon. Please mix well before use and strictly follow the product storage and transportation instructions. In order to obtain the best performance, the bonding surface should be clean, dry and free of grease. For high-strength structural bonds, special surface treatment can increase bond strength and durability. The material taken out of the container may be contaminated during use. Do not put the material back into the original container. Kingbali cannot be held responsible for products that are contaminated or stored under non-instructed conditions.