1924 Medium strength universal thread locking adhesive
Product features
application:
1924 Medium strength universal thread locking adhesive can be applied to active metals (such as brass and copper) or to inert substrates such asstainless steel and threaded fasteners with coated surfaces. This product is resistant to hightemperature and grease. It allows a variety of minor surface contamination and preventsaccidental loosening, movement, leakage and corrosion.
Features and advantages:
▪ No medium viscosity, medium strength, removable, high-touch denaturation single component solvent-free acrylic adhesive;
▪ Easy to apply glue, easy to remove, fast curing speed, complete filling thread gap, anti-impact vibration;
EIGENVALUE
| characteristic | 1000-1924 | standard test |
| colour | red | Visually |
| Viscosity (25°C) | 5-7 Pa.s | ASTM D2196 |
| density | 1.25 g/cm3 | ASTM D792 |
| Volume resistance | 10 12 Ω · CM | ASTM-D257 |
| Breakdown voltage (1mm) | ≥5 KV | ASTM D149 |
| Shear strength | ＞8 MPa | ASTM D412-1998A |
| Breaking torque | ＞25 N.M | GB/T 18747 |
| Average torque | ＞15 N.M | GB/T 18747 |
| Heat distortion temperature | ≥120 °C | EN344 |
| hardness | ≥60 Shore D | ASTM D2240 |
| Surface drying time (25°C) | 10 ～ 30 min | / |
| Curing time (25°C) | 24 H | / |
| Note: The data recorded in this TDS are representative values rather than guaranteed values. To improve product performance, specifications are subject to change without notice. The use of the product recorded in this TDS is only an example. The product can have various application scenarios and environments, which are beyond our control. Therefore, you need to make your own sufficient before using the product to determine whether the product is suitable for your production process and conditions. Evaluate to confirm whether its performance and effect are in line with expectations. For applications that need to be considered safe, please test and confirm their safety in advance. In addition, the company does not guarantee that the use described in this TDS will not cause any patent infringement. Before using this product, please carefully read the explanatory text and safety data sheet (MSDS) marked on the main body of the product. This product is manufactured for general industrial applications. Do not use for medical purposes. The product may precipitate during storage. This is a normal phenomenon. Please mix well before use and strictly follow the product storage and transportation instructions. In order to obtain the best performance, the bonding surface should be clean, dry and free of grease. For high-strength structural bonds, special surface treatment can increase bond strength and durability. The material taken out of the container may be contaminated during use. Do not put the material back into the original container. Kingbali cannot be held responsible for products that are contaminated or stored under non-instructed conditions. | ||