Electric heating film

1430 silicone electric heating film

Product features

application:

• case of wet,non-explosive gas,industrial equipment pipelines,oil druns and other tropical areas canbe directly wound on the heated objects’ surface,and the installation is stable and secure.

• Play an irreplaceable role in the new energy vehicle power batterypack preheating and backviewmirror;Good seismic,anti-friction,high thermal conductivity,strong insulation properties,highmechanical strength in the new energy auxiliary thermal safety performance has played an enormousrole.

Features and advantages:

• Heat conversion rate is as high as 98%, strongplasticity;

• Even temperature,available to be designedinto any shape;

• The material has the characteristics of shockresistance,compression resistance,wearresistance,etc.

• Soft,ultra-thin,and good insulation; Metal heating body,long life,stable power;

• High mechanical strength,can withstand100kg/cm²;

• The surface can be waterproof,not completelywaterproof.When it contact with water,it canbe powered off and wiped,but don’t placeand immerse into water.

EIGENVALUE

1430 thermal conductive silicone electric heating film
MaterialThermal silica
power≤1W/cm²
thickness0.83~1.56mm
Voltage3.7~600VAC/DC
Flammability ratingUL-94 V0
Withstand voltage strength2500VAC/60s
Insulation resistance≥100mΩ
Operating temperature-40~250°C
Custom size600*2000m
Note: The above performance data is the typical data of the product tested at a humidity of 70% and a temperature of 25°C. It is for reference only when used by customers, and cannot fully guarantee all the data that can be achieved in a specific environment. Please refer to the actual measured data when using it. It is recommended that the user do a suitability experiment before using it to prevent the product from being used in unsuitable occasions. If the adverse consequences caused by the incompatibility of the applicable occasion, Kingbali Company reserves The right to interpret the product.