3000 series potting glue
Product features
application:
Features and advantages:
KINGBALI 3000 series of products is the liquid siloxane complex mechanically or manually into the device equipped with electronic components, lines, curing at room temperature or heating conditions to become excellent performance of thermoset polymer insulation materials, the process used in the liquid siloxane complex is the sealing glue.
▪ low viscosity, good leveling, suitable for complex electronic accessories and LED potting;
▪ the toughness after curing is good, the impact resistance is good;
▪ heat resistance, moisture resistance, cold resistance is excellent, after application can extend the life of electronic accessories;
▪ plus molding, can be cured at room temperature and heating;
▪ has excellent moisture and water resistance.
EIGENVALUE
| Uncured characteristics (25℃/70%RH) | 9000-3300 | 9000-3400 | 9000-3700 | 9000-3800 | standard test |
| colour | white | A: Black / B: White | white | white | Visually |
| Viscosity | A：8000 / B：8500 | A：4000 / B：3800 | A：7000 / B：4500 | 10000 | ASTM D445-04 |
| KINGBALI potting glue Characteristics after curing (25 ℃/RH 70%) | |||||
| hardness | 50-70 Shore 00 | 50-70 Shore 00 | 40-60 Shore 00 | 40-60 Shore 00 | ASTM D2240 |
| Impact strength | ＞7 g /cm2 | ＞7 g /cm2 | ＞7 g /cm2 | ＞7 g /cm2 | ASTM D412-1998A |
| Water absorption rate 24Hrs | <0.05% | <0.05% | <0.05% | <0.05% | GB/T5486.3 |
| Bending strength | ＞80 kg/cm2 | ＞80 kg/cm2 | ＞80 kg/cm2 | ＞80 kg/cm2 | ASTM D412-1998A |
| Thermal Conductivity | 1.0 W/M.K | 0.7 W/M.K | 0.8 W/M.K | 1.0 W/M.K | ASTM D5470 |
| Oxygen Index | ＞30 | ＞30 | ＞30 | ＞30 | GB2406-80 |
| Volume resistance | ≥1.0ｘ10 15 Ω · CM | ≥1.0ｘ10 15 Ω · CM | ≥1.0ｘ10 15 Ω · CM | ≥1.0ｘ10 15 Ω · CM | ASTM D257 |
| Dielectric strength | ≥10 KV/mm | ≥10 KV/mm | ≥10 KV/mm | ≥10 KV/mm | ASTM D149 |
| Operating temperature | -40~200 ℃ | -40~200 ℃ | -40~200 ℃ | -40~200 ℃ | EN344 |
| Operating time | 1-2 Hrs | 0.5 Hrs | 1-2 Hrs | 0.5 Hrs | / |
| Full curing time | 6 hrs (25 ℃) 10 ～ 15 min (120 ℃) | Hr 6 Hrs (25 ℃) 5 ～ 10 min (120 ℃) | A：＞6 Hrs(25℃) B：10～15 min(120℃) | A：＞6 Hrs(25℃) B：5～10 min(120℃) | / |
| Flammability rating | V0 | V0 | V0 | V0 | UL 94 |
| Note: The data recorded on this website are representative values rather than guaranteed values. To improve product performance, specifications are subject to change without notice. The use of the product recorded in this website is just an example. The product can have a variety of different application scenarios and environments, which are beyond our control. Therefore, whether the product is suitable for your production process and conditions, you need to make full use of it before using it. Evaluate to confirm whether its performance and effect are in line with expectations. For applications that need to be considered safe, please test and confirm their safety in advance. In addition, the company does not guarantee that the purposes recorded on this website will not infringe any patents. Before using this product, please carefully read the explanatory text and safety data sheet (MSDS) marked on the main body of the product. This product is manufactured for general industrial applications. Do not use for medical purposes. The product may precipitate during storage. This is a normal phenomenon. Please mix well before use and strictly follow the product storage and transportation instructions. In order to obtain the best performance, the bonding surface should be clean, dry and free of grease. For high-strength structural bonds, special surface treatment can increase bond strength and durability. The material taken out of the container may be contaminated during use. Do not put the material back into the original container. Kingbali® cannot be held responsible for products that are contaminated or stored under non-instructed conditions. | |||||